MIG welding-Contract Manufacturing Specialists of Michigan

MIG Welding

MIG welding-Contract Manufacturing Specialists of Michigan

There are still so many people who don’t understand the meaning of MIG welding. One thing you need to understand with this technique is that it has so many applications in the industry. You could be passing across so many projects that use this technique only that you don’t know it is MIG welding. You can also compare MIG and TIG welding to see the one that has the most benefits for you. It is wise to understand that each welding technique has its own advantages and disadvantages. However, the choice of a welding technique depends on the type of project that you are working on. There are so many things that you can find out by using MIG welding.

Therefore, if you are starting to look for your first MIG welding expert, it is good to consider all the pros and cons of the process. Most of these things basically reside in the features of MIG welding. In this article, you will be learning how each of them will affect your decision. One thing you will discover is that MIG is among the best welding techniques in the market.


This could be one of the major disadvantages of MIG welding. One thing you need to understand is that the wire welder is not a very portable machine. There are several reasons why this is the case. First, the MIG welder calls upon the use of a shielding gas so as to protect the weld. It is good to understand the shielding gas that you need to use for your MIG welder. The weight of an ordinary tank of a welding gas can be more than a hundred pounds making it quite awkward to carry. Most MIG welders will need you to utilize a cart to carry the gas and the machine.

The MIG welder also requires a roll of wire. You cannot carry out MIG welding without using this roll of wire. The wire tends to range between 10-pounds to 60-pound spools and above. There is a way you can combine your shielding gas and wire which is the use of flux-core wire. It is a wire that contains a central core of flux when you burn it to provide a protective later much like the shielding gas.

When you use the flux, you will discover that it doesn’t work as the shielding gas. However, if you are searching for an option that is more portable, it can be a perfect solution. Therefore, one of the things that you can find in MIG welding is that it can be heavy. Even the lightest welder under this category like the Hobart 500599 Handler 140 weights 65 pounds.

When you combine this with the awkwardness of the machine, you will discover that even just lugging this welder around is a way of throwing your back out of the wrack. We have some MIG welders that are designed to be portable by there are limited by their weight and other features.

Overall Look

One advantage that will make you go for MIG welding is the fact that it produces a weld that is clean. When you look at the various forms of welding like the TIG and stick welding, you will discover that the weld that MIG produces is fairly clean. However, TIG tends to produce the cleanest look of them all. The finishes that it emanates have minimal spatter. The reason is that TIG utilizes more od a spray arc instead of popping as it welds. TIG welders, in fact, hum during welding, and this is very quiet.

On the other hand, a stick weld tends to have a fairly dirty look. The reason is the flux that is on its welding rod. Also, when dealing with a stick welder, you have to remove the slag after laying down a bead.

In MIG welding, it may produce spatter as you continue to weld but you will not have to chip off the slag. In fact, when using the spray arc method while trying to hot weld and penetrate deeply with your welding will present the cleanest results with the least amount of change.

Lastly, when dealing with MIG welding, don’t forget to turn on the shielding glass because it produces a weld that looks terrible that won’t penetrate well and doesn’t look good. The weld can easily break if it does not use gas in welding. MIG welds tend to have a great look as long as you set your machine well. To get the best results, you can contact Contract Manufacturing Specialists of Michigan.

Loss of Gas

This is more of a disadvantage when dealing with MIG welding. You will need to use a shielding gas to protect the weld. However, this depends on your situation as you can push it away from the welding if you happen to have much winding.

For example, if you are welding a piece of farm equipment by working outdoors and the weather is windy, laying a good beat can be so hard. You will notice a high level of porosity when the gas is removed which appears to be a bunch of pinholes in your welding. However, there are bunches of going around this issue.

The first step is to cover your weld using a welder’s blanket. It is a special blanket that you may put around your weld to help in blocking the wind. It is one of the most important things when using the MIG welder. You can also use this blanket to cover things so that they don’t course fire and get burned. There are so many people who are using to cover them and also the weld to reduce the issues of gas loss. Therefore, you can use it for multiple cases as the need arises.

The other thing that you need to note during MIG welding is Fluxcore wire. You need to think of using the flux core that does not require the use of shielding gas. However, if there is a lot of wind, even the flux core will not do any good for you. In the end, there are viable options on how to deal with the issue when you choose to use MIG welding. Contract Manufacturing Specialists of Michigan know the right techniques and procedures to carry out MIG welding. You can be sure of getting the best results from this process when you choose to hire professionals.

Looking for a First-Class contract manufacturing service?

We service multiple cities throughout the state of Michigan. We provide all the services listed above, and much more in every city throughout Michigan.

If you don’t see your city listed or a specific service listed, don’t worry. All you have to do is contact us by either giving us a call or filling out our online contact form. Then we’ll discover what are some of the top solutions for you, your business, and executing a solid solution.

See our city areas of service: